Table of Contents
Advertisement
38. Power On Delay (Command: f h)
► Set the schedule delay when the power is turned on (Unit:
second)
Transmission [f][h][][Set ID][][Data][Cr]
The data range is from 00 to 64(in Hex)
(* 00H: Off)
* Refer to 'Real data mapping'. See p.55.
Ack [h][][Set ID][][OK/NG][Data][x]
* Real data mapping
00 : Step 0
A :
Step 10 (Set ID 10)
F :
Step 15 (Set ID 15)
10 : Step 16 (Set ID 16)
64 : Step 100
6E : Step 110
73 : Step 115
74 : Step 116
CF : Step 199
FE : Step 254
FF : Step 255
39. Language (Command : f i)
► Set the OSD language.
Transmission [f][i][][Set ID][][Data][Cr]
Data 0. Korean
1. Chinese
2. Japanese
3. English
4. French
5. German
6. Spanish (SCA)
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
7. Portuguese
8. Spanish(EU)
9. Arabic
a. Persian
b. Turkish
EXTERNAL EQUIPMENT SETUP
40. Reset (Command : f k)
► Execute the Picture, Screen and Factory Reset functions.
Transmission [f][k][][Set ID][][Data][Cr]
Data 0 : Picture Reset
1 : Screen Reset
2 : Factory Reset
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
41. H Position (Command : f q)
► To set the Horizontal position.
Transmission [f][q][][Set ID][][Data][Cr]
The data range is from 00 to 64(in Hex)
* Refer to 'Real data mapping'. See p.55.
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
* This function is only working in Tile Off Mode.
42. V Position (Command : f r)
► To set the Vertical Position.
Transmission [f][r][][Set ID][][Data][Cr]
The data range is from 00 to 64(in Hex)
* Refer to 'Real data mapping'. See p.55.
Ack [r][ ][Set ID][ ][OK/NG][Data][x]
* This function is only working in Tile Off Mode.
43. H Size (Command : f s)
► To set the Horizontal size.
Transmission [f][s][][Set ID][][Data][Cr]
The data range is from 00 to 64(in Hex)
* Refer to 'Real data mapping'. See p.55.
Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* This function is only working in Tile Off Mode.
55
Advertisement
Table of Contents
