Technical Information; Emc Information - Philips AVENT SCD223 Manual

Blistering
Injured tissue on nipple
(nipple trauma)
Bleeding
Clogged mammary
ducts

Technical information

EMC information

The Philips Avent breast pump needs special precautions regarding EMC and needs to be installed
and put into service according to the EMC information provided in this section.
Portable and mobile RF communications equipment can affect the Philips Avent breast pump.
The electronic breast pump has no essential performance. Due to EMC influences, like wireless home
network devices, mobile phones or cordless telephones, the breast pump can turn off or go into error
mode. This will not lead to unacceptable risks. To prevent interference, keep other electric equipment
at least 3.3 feet/1.0 m away from the breast pump during expressing and do not stack with other
electrical equipment. Cable length of the adapter: 2.50 meter/ 8.2 feet.
Electromagnetic Compatibility (EMC, IEC 60601-1-2)
Declaration – electromagnetic emissions
The Philips Avent breast pump is intended for use in the electromagnetic environment specified
below. The user of the Philips Avent breast pump should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic
emissions IEC
61000-3-2
Voltage
fluctuations/ flicker
emissions IEC
61000-3-3
Declaration – electromagnetic immunity
The Philips Avent breast pump is intended for use in the electromagnetic environment specified
below. The user of the Philips Avent breast pump should assure that it is used in such an environment.
Symptom
Looks like small bubbles on the surface of the skin.
- Fissures or cracked nipples.
- Skin tissue peeling off the nipple. Normally occurs in combination with
cracked nipples and/or blisters.
-Nipple tear.
Cracked or teared nipples can lead to bleeding of the affected area.
A red, tender lump on the breast. May include erythema (redness) of the
breast area and fever. Can lead to Mastitis (breast inflammation) if left
untreated.
Compliance Electromagnetic environment – guidance
Group 1 The Philips Avent breast pump uses RF energy only for its
internal function. Therefore, its RF emissions are very low and
are not likely to cause any interference in nearby electronic
equipment.
Class B
Class A
The Philips Avent breast pump is suitable for use in all
establishments, including domestic establishments and those
directly connected to the public low voltage power supply
network that supplies buildings used for domestic purposes.
Complies
English
21