Subscribe to Our Youtube Channel
Related Manuals for netvox R718MBC
Summary of Contents for netvox R718MBC
- Page 1 R718MBC Model： Wireless Activity Timer Wireless Activity Timer R718MBC User Manual...
-
Page 2: Table Of Contents
Table of Content 1. Introduction................................2 2. Appearance................................. 3 3. Main Features................................3 4.Set up Instruction.................................3 4.1 Power on and Turn on / off..........................3 4.2 Join Into LoRa Network...........................4 4.3 Function Key..............................4 4.4 Data Report...............................4 5. Restore to Factory Setting............................5 6. -
Page 3: Introduction
Introduction The R718MBC series equipment is a vibration alarm device for Netvox ClassA type equipment based on the LoRaWAN open protocol. It can count time of the movement or vibration duration of the equipment and is compatible with the LoRaWAN protocol. -
Page 4: Appearance
2. Appearance Fig.1 R718MBC Appearance 3. Main Features Compatible with LoRaWAN protocol. Powered by 2 x ER14505 3.6V Lithium AA battery Easy set up and installation Detectable voltage value and device movement status 4.Set up Instruction 4.1 Power on and Turn on / off... -
Page 5: Join Into Lora Network
The green indicator will stay on for 5 seconds to show it joins into the network, otherwise, the green indicator will be off. (2) If R718MBC had been joined into a LoRa network, remove and insert the batteries; it will repeat step (1). -
Page 6: Restore To Factory Setting
(B) When it is not in the network → R718MBC will enter sleeping mode and wake up every 15 seconds to search a network to join in the first two minutes. After two minutes, it will wake up every 15 minutes to request to join the network. -
Page 7: Low Voltage Alarming
7. Low Voltage Alarming The operating voltage threshold is 3.2V. If the battery voltage is lower than 3.2V, R718MBC will send a low-power warning to the LoRa network. 8. Installation This product comes with waterproof function. When using it, the back of it can be adsorbed on the iron surface, or the two ends can be fixed to the wall with screws. -
Page 8: Relevant Products
10. Relevant Products Model Function Appearance Detect the movement or vibration of the R718MBC device and triggers an alarm. Counts the number of movements or R718MBC vibrations of the device. Counts the movement or vibration duration R718MBC of the device.
Need help?
Do you have a question about the R718MBC and is the answer not in the manual?
Questions and answers