Door Reversal Instructions - Tramontina 80901/100 Use & Care Instructions Manual

DOOR REVERSAL INSTRUCTIONS

TOOLS NEEDED: Phillips screwdriver or 5/16" socket tool and thin flathead screwdriver.
The refrigerator is shipped with the brackets attached on the right side.
The door may be reversed to allow opening from the left side.
If you plan on reversing the door hinges, DO NOT plug the refrigerator into the power outlet.
Remove glass shelves before reversing the door.
IMPORTANT: NEVER LAY THE REFRIGERATOR ON ITS BACK.
The compressor and motor components are installed at the back of the refrigerator and may
easily be damaged if the refrigerator is placed on its back.
1
Gently remove the plastic hole insert plugs from
the left side of the refrigerator with a thin flathead
screwdriver.
3
Slide the cover towards the front of the refrigerator
and lift off.
5
Lift and remove the door.
2
Loosen the triangular bracket cover by pushing the
bracket cover towards the back of the refrigerator
and simultaneously pulling up.
4
Remove the metal bracket by unscrewing the two
screws.
6
Remove the plastic hole inserts from the top of the
door and install on the opposite side.
- 6 -