TANDBERG Compass User Manual page 22

TANDBERG COMPASS MXP / UTILITY MXP
2. ISDN configuration
Set the Network type to the desired network. Specify the settings for the selected
network in the relevant menu. For details, follow the instructions in
Settings.
3. LAN configuration
Select LAN Settings in the Network menu and specify the necessary LAN settings
according to the instructions from your LAN administrator. For details, follow the
instructions in
refer to H.323 Settings
4. Network Profiles
Please refer to
5. Data Port
Not available on this product.
6. Save changes
Remember to save any changes made in the menu by selecting the Save button on
the Menu line and pressing OK.
Kiosk Mode Settings:
Press OK/Menu to open the Main Menu, if not already displayed. Select Control Panel -
Administrator Settings – Menu Settings – Kiosk mode Settings to open the Kiosk Mode
Settings menu.
The default Kiosk Mode settings for the Utility MXP are:
- Language menu
- Available languages
Auto dial
-
Allow use of Remote Control
-
- Phone Book
Kiosk menu
-
After having configured the settings of the Utility MXP, you must activate Kiosk mode
by setting Kiosk Mode til ON. Be avare that you cannot deactivate kiosk mode again
through the menu, but only through the web interface, telent or the remote control.
The default Kiosk Mode settings for the Compass MXP are:
Language menu
-
- Available languages
Auto dial
-
- Allow use of Remote Control
- Phone Book
Kiosk menu
-
After having configured the settings of the Compass MXP, you must activate Kiosk
mode by setting Kiosk Mode til ON. Be avare that you cannot deactivate kiosk mode
again through the menu, but only through the web interface, telent or the remote
control.
See Kiosk Mode Settings
LAN Settings. If there is an H.323 Gatekeeper present on your LAN,
as well.
Network Profiles for details
OFF
for more details.
check boxes with all languages*
ON
YES
Local
OFF
OFF
check boxes with all languages*
ON
NO
Local
ON
ISDN-BRI
14