Unova Intermec 1551C User Manual page 19

All manuals and user guides at all-guides.com
1551C03XX Decoding Laser Scanner
The 1551C03XX is designed to interface with IBM 4683/4684/4693/4694
point of sale (POS) terminals. The 1551C03XX can also be programmed for
RS232 interfaces and optical coupled interface adapter (OCIA). See the quick
reference guide for your scanner or contact your local Intermec representative
for a list of the specific 1551C03XX terminals.
To connect the 1551C03XX scanner to an IBM 4683 Interface
1. Connect the modular plug on the cable to the bottom of the scanner handle.
Tighten the screw that secures the plug in the handle.
Note:
The interface cable has either an 8-pin SDL (synchronous data
link) connector for the 5B port on the POS terminal, or a 4-pin SDL connector
for the 9A or 9B port.
2. Make sure the power to the terminal is turned off. Then connect the other
end of the cable to the port in the POS terminal.
3. Turn on the power to the terminal.
1–6 1551C Decoding Laser Scanner User's Guide