Contents Warranty ............3 Safety information ........3 Information on disposal of unit ....3 Features ............4 Specifications ..........4 Product overview .......... 5 Front panel ..........5 Speaker connectro pins layout ....5 How to install and connect the APP .... 6 APP installation ........
Thank you for purchasing this Macrom product. Should your product need warranty service, please return it to the shop where you buy it or to the Macrom distributor in your country. The warranty does not cover damage due to improper use and or installation, incorrect connections to power supply and audio sources, exposure to excessive humidity, unauthorized repair attempts or modifications.
Dynamic Bass adjustment • Selector for switch-on mode (REMOTE or SIGNAL) Specifications M-DSPA.500 with RCA line input or high level input. • Nominal output power 54Watt x 4 channels class AB (32W RMS) 300Watt x Class D Subwoofer (170 RMS) min 4 Ohm •...
Product overview Front Panel Back view 1. Power mode selection switch BT ANT M-DSPA.500 POWER IN (REMOTE or SIGNAL) FUSE (30A) 2. Bluetooth antenna POWER REMOTE ON SIGNAL ON PROTECT BATT POWER ON 3. LED protection indicator 4. Power LED indicator 5.
1. Download the APP from Google Play or Apple Store searching for “M-DSPA.500” 2. Install the application in your Android or iPhone mobile phone. 3. Activate Bluetooth on your mobile phone and search for “M-DSPA.500”, then pair it. If necessary, the coupling code is 1234.
1. Download the APP from Google Play or Apple Store searching for “M-DSPA.500” 2. Install the application in your Android or iPhone mobile phone. 3. Activate Bluetooth on your mobile phone and search for “M-DSPA.500”, then pair it. If necessary, the coupling code is 1234.
APP overview Main 1. Parametric equalizer; click to get the equalization functions. 2. Crossover; click to get the crossover functions. 3. Save to phone; after finishing the setting, you can create the name of the audio setting and then with the (OK) button the audio setting will be saved in your mobile phone. 4.
APP overview Setting channels 1. FL - Left front gain slider, adjusted from Off to 0dB 2. FR - Right front gain slider, adjusted from Off to 0dB 3. RL - Left rear gain slider, adjusted from Off to 0dB 4.
APP overview Selector gain level 1. Value of the chosen level between Off and 0dB (max). 2. Cursor to change the value of the level. Selector frequency cuts 1. Cancel, selection cancel 2. Type the value of the selected cutoff frequency between 20Hz to 20,000Hz. 3.
1. Plug & Play wiring Interpose the Plug & Play harness between the Car stereo and the connector coming from the car and connect the end to the M-DSPA.500 amplifier. Note: See the wiring list available at www.macrom.it. 2. Power terminal Connect the (+) terminal to the car's fuse.
Connections System extension Thanks to the pre-amplified outputs present on the product, it is possible to expand the system by adding a multi-channel amplifier (4 + 1) to enhance the sound system. NON UTILIZZARE BATT +12V Ground (Telaio) Uscita remota Ingresso (+12V ) Altoparlanti...
Declaration of Conformity M-DSPA.500 DSP POWER AMPLIFIER Hereby, Aldinet S.p.A, declares that this type of M-DSPA.500, Brand Macrom is in compliance with the essential requirements and other relevant provisions of Directive R&TTE 1999/5/EC. The full text of the EU Declaration of conformity is available at the following internet address: www.macrom.it or at Aldinet S.p.A., Viale Colombo, 8 - 20090 Trezzano S/N (MI) Italy...