Download Print this page
OSP ASCEND II ACT3020 Manual

OSP ASCEND II ACT3020 Manual

Active height-adjustable seat

Advertisement

Quick Links

OSP FURNITURE LIMITED PRODUCT WARRANTY
ASCEND II
Active seating and tables are warranted from the date of purchase as follows:
• 3 Years against failure due to materials and workmanship
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or less.
This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty
on all parts applies. Fabric and foam is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
It is the customer's responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty
will be paid by Office Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free
parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time.
ACTIVE HEIGHT-ADJUSTABLE SEAT
WARRANTY & WARNING
ASCEND ll
ACT3020
FEATURES
• OUTTASIGHT SEAT HEIGHT ADJUSTMENT
See page 4 for operating instructions.
NOTE: It is normal for chair to slightly lower under body weight.
WARNING
1.
Use this product only one person at a time.
2.
Do not use this chair unless all bolts screws and knobs are
securely tightened.
3.
Check that all bolts screws and knobs are tight every three
months or as needed.
4.
Move & carry chair as instructed.
5.
Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
6.
Do not use chair as a stepladder.
7.
Use this chair for its intended purpose only.
8.
Use mild detergent only for cleaning.

Advertisement

loading

Summary of Contents for OSP ASCEND II ACT3020

  • Page 1 Do not use chair as a stepladder. Use this chair for its intended purpose only. Use mild detergent only for cleaning. OSP FURNITURE LIMITED PRODUCT WARRANTY ASCEND II Active seating and tables are warranted from the date of purchase as follows: •...
  • Page 2: Parts List

    ASCEND ll ACT3020 ACTIVE HEIGHT-ADJUSTABLE SEAT ASSEMBLY INSTRUCTIONS PARTS LIST (1) Seat (1Piece) (2) Pneumatic Cylinder (1Piece) (3) Bace Cover (1Piece) (4) Base (1Piece) (5) Screw (6Pieces) STEP 1 STEP 2 Remove hardware from Base Cover (3). NOTE: Remove black & white plastic protective caps from Pneumatic Cylinder (2).
  • Page 3 ASCEND ll ACT3020 ACTIVE HEIGHT-ADJUSTABLE SEAT ASSEMBLY INSTRUCTIONS STEP 5 STEP 6 Turn upside down. Place fabric over edge of Base Cover (3). NOTE: Do not allow fabric to contact upper (silver) portion of Pneumatic Cylinder (2). STEP 7 Secure Base (4) to Base Cover (3) with Screws (5). FULLY TIGHTEN ALL SCREWS.
  • Page 4 ASCEND ll ACT3020 ACTIVE HEIGHT-ADJUSTABLE SEAT OPERATING INSTRUCTIONS OUTTASIGHT easy-adjust mechanism • Adjusts from any position • OUTTASIGHT for clean, contemparary appearance...
  • Page 5 ASCEND ll ACT3020 ACTIVE HEIGHT-ADJUSTABLE SEAT OPERATING INSTRUCTIONS DO NOT REST FEET ON BASE. USE A THREE-POINT SITTING POSITION WITH TWO FEET ON FLOOR. TIGHTEN CORE MUSCLES. ALWAYS CARRY STOOL WITH TWO HANDS.