Hints On Disposal; Declaration Of Conformity - Klarstein 10027054 Manual

"AT/PULSE" Button
When machine in standby mode, push this button one by one time, usually for ICE crush function.
5. Completed blending, push "START/END" button, blender stop working.
Maintenance Tips
1. When cleaning or maintaining, unplug appliance and ensure main switch is turned to off position.
2. Clean the blender body and the cover with a sponge or cloth
3. Do not clean inside the jug by hand unless the blade is already removed.
4. Clean the rotary shaft and the motor base with a dry rag.
5. If required use a clean cloth with a mild-ph detergent to clean. Never place the motor base in
water or other liquid.
Troubleshooting
Check if the current protector button is turned off , press it and then reset. If the blender still doesn't
work. Check the following:
1. Whether the appliance is plugged in
2. If there is a power cut
3. If none of the above applies, please do not attempt to fi x the blender yourself and instead, ask
specialized personnel for repair or approved supplier for replacement.
According to the European waste regulation 2012/19/EU this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)

Hints on Disposal

Declaration of Conformity

8