Sound
Sound Mode: The sound modes including
Standard, Live1, Live2, Music, Theater,
Speech and User.
SRS Effect
Balance: Adjust the relative volume of the
Auto Volume
speakers in a multiple speaker system.
EQ
E Q : A d j u s t e a c h s o u n d c o m p o n e n t .
Balance
Press◄/► to select the frequency, then
Sound Mode
press▲/▼ to adjust the values.
Auto Volume: According to different audio
signal, it can adjust volume automatically.
SRS Effect: Enhance the surround sound
Sound Setting
and bass sound effects.
Screen
NOTES
・ Only Display Area is available in HDMI.
・ When no signal or DVI/RGB signal in HDMI, the Screen
menu is not available.
・ The Screen menu is not available in 3D mode.
・ Phase/Clock/Auto Adjust is only available in VGA.
H.Position: Adjust the horizontal position of
image.
V.Position: Adjust the vertical position of
H.Position
image.
V.Position
H Size: Adjust the horizontal amplitude of
H Size
image.
V Size
V Size: Adjust the vertical amplitude of
image.
Display Area: Control the repetition rate of
HDMI, including Full and Zoom.
Phase: Control the signal phase, which can
Screen
improve focus clarity and image stability.
Clock: Control the signal clock, which can
improve the image stability.
Auto Adjust: Adjust the position and size of
picture automatically.
NOTE
H.Position/V.Position/H Size/V Size menus are not
available in VGA mode.
Basic Features
Zoom
Zoom 2
Zoom 1
Normal
Full screen
Zoom Setting
Functions: Press Zoom button to set the zoom mode:
Full Screen, Normal, Zoom1, Zoom2, Smart Zoom and Dot
To Dot.
Full screen: This selection will
allow you to adjust the picture
horizontally, in linear proportion,
to fill the entire screen.
Normal: This selection will
allow you to view a picture
with anoriginal 4:3 aspect ratio,
black bars will appear on both
the left and right of the screen.
Zoom 1: This selection will
a l l o w y o u t o v i e w a 1 6 : 9
picture with a 14:9 aspect ratio.
Black bars will appear on both
the left and right of the screen
and clips off part from the top
and bottom.
Zoom 2: This selection will
allow you to view the picture
without any alteration, while
f i l l i n g t h e e n t i r e s c r e e n .
However, the top and bottom
of the picture will be cropped.
Smart Zoom: This selection
is similar to 16:9 mode, but
shows more of the horizontal
sides and clips off a little from
the top and bottom.
Dot To Dot: This selection will
detect the resolution of the
HDMI signal and display an
image with the same number
of pixels.
NOTE
The options of the Zoom varies with different source.
17
|
Basic Features USER MANUAL