Related Manuals for Outland Technology OTPS1KW-ASM-ROV-R1
Summary of Contents for Outland Technology OTPS1KW-ASM-ROV-R1
- Page 1 User Manual OTPS1KW-ASM-ROV-R1/ OTPS1KW-ASM-TOPSIDE-R1 Outland Technology, Inc. 38190 Commercial Court, Slidell, LA 70458 985-847-1104 sales@outlandtech.com www.outlandtech.com Document Number: 46-0013 Rev A5 October 2019...
-
Page 2: Table Of Contents
Contents Safety at a Glance ........................3 System Overview ........................4 Power Supply Unit: OTPS1KW-ASM-TOPSIDE-R1..............4 ROV Power Supply Enclosure: OTPS1KW-ASM-ROV-R1 ............. 5 System Status Display ......................5 User Access Area ........................5 Installation ..........................5 Quick Start Guide ........................6 Troubleshooting ......................... -
Page 3: Safety At A Glance
• Always grease wet mate connectors prior to use. • There are no user serviceable parts in the OTPS1KW-ASM-ROV-R1 or OTPS1KW-ASM- TOPSIDE-R1 except for the user access area. Do not attempt to open either the OTPS1KW- ASM-ROV-R1 or OTPS1KW-ASM-TOPSIDE-R1. Legend... -
Page 4: System Overview
The battery replacement system is comprised of three parts: the OTPS1KW-ASM-TOPSIDE- R1, OTPS1KW-ASM-ROV-R1, and tether. The OTPS1KW-ASM-ROV-R1 ROV enclosure easily replaces the Battery Enclosure utilizing the same dimensions and mounting. The OTPS1KW-ASM-ROV-R1 utilizes wet mate connectors allowing the tether to be removed. The enclosure provides 1000W @ 15V to the vehicle and as well as data pass through. -
Page 5: Rov Power Supply Enclosure: Otps1Kw-Asm-Rov-R1
Fathom-X interface board and ethernet to USB adapter. The spare pairs and 12V power for the Fathom-X are also available in the User Access Area. Installation The OTPS1KW-ASM-ROV-R1 bottle is delivered ready for install. Follow the standard procedure for the Blue ROV2 Assembly. Outland Technology Power Supply BlueROV2 Integration Guide... -
Page 6: Quick Start Guide
3. Inspect tether and bottle connectors for damage and lubricate with waterproof silicone grease. Grease procedure: Subconn Handling Instructions 4. Connect tether to OTPS1KW-ASM-ROV-R1 and OTPS1KW-ASM-TOPSIDE-R1. Be mindful of the of the connector mating position when connecting. 5. Test GFI a. -
Page 7: Electrical Interface
• If HV Bias is <±2% with dummy plugged tether, power down unit and reconnect to vehicle. Turn on power and observe the HV bias reading. If HV Bias >±2% return OTPS1KW-ASM-ROV-R1 for repair. 2. HV Bias Trips GFI Repeat steps from bias condition above and return faulty components for repair. - Page 8 Blue Fathom-X pair Fathom-X + Blue/White Note: All 4 pairs are wired up to the 8pin tether connector using a 1-1 connection by wire color. Green and Brown spare twisted pairs are connected in the OTPS1KW-ASM-ROV-R1 for possible future expansion.
- Page 9 Tether Wiring...
Need help?
Do you have a question about the OTPS1KW-ASM-ROV-R1 and is the answer not in the manual?
Questions and answers