Water Dispenser; Bottle Rack - LG GB32MVN Owner's Manual

Operation
Water Dispenser (Optional)
Features
Dispenser Pad
Water Tank
Filling of WATER TANK
How to Remove the Water Tank
• The assembly is the reverse of removal.
• Be careful not to press on with valve.
• When you assemble water tank on the door, be
careful to install certainly.
1.
Pull out the water tank.
Then open the cap cover.
2.
Water can be filled up to 2.3 liter.
3.
After filling potable water. Close the Cap
Cover.
CAUTION
w w
• Please use bottled water currently circulated.
- If you fill soft drinks, milk and fruit juices or
ground water(included Ca, Mg, Si etc..) or no
filtered water, it may cause malfunctioning.
• When you fill water tank with water, please let
hot water cool before putting water tank in
refrigerator.
- Hot water cause malfunctioning.
Cap Cover
Drinking
1.
Press the dispenser pad with a cup.
2.
If pressing the pad, water inside of the
dispenser is supplied.
3.
If slowly removing a cup from the pad, water
will not fall down.
4.
Some noise after dispensing is the sound to
absorb water remained in the tube, which is for
the purpose of sanitation.
CAUTION
w w
Do not use other beverage (milk, juice,
carbonated beverage etc) than potable water.
Especially beverage including grain must not be
used (may result in failure).
WARNING
w w
Fill with the potable water only.
Pump can generate some noise, while the cool
water is taken from the tank (e.g. Bottle, water tank).

Bottle Rack

Applicable to some models only:
• Bottles can be stored laterally with this wine
corner.
Then you can invert the wine rack and place it on
the cover, aseembly.