Springlane Elli Instruction Manual page 32

7. Place the mixing blade exactly onto
the higher wave at the bottom of
the ice cream bowl.
8. Place the lid on the ice cream bowl
and turn it counterclockwise until
the end, so that it is fixed. You can
add other ingredients later through
the opening in the lid.
9. Plug the device plug into a socket.
On the display, you can now see
"00" blinking.
32
10. Press the power-button. The display
will light up. The time setting is
blinking.
11. Select the desired preparation time
by turning the knob.
12. Press the "Start/Pause" button to
start the mixing and cooling process.
13. The remaining time and the tempe-
rature will be shown on the display.
14. After the time is up, the device
stops automatically and a signal
tone sounds.
15. If the ice cream is not taken out
within 10 minutes after the time is
up and no other button is pressed,
the ice cream machine automati-
cally goes into cooling mode for 1
hour. Note: The ice cream machine
automatically stops at a certain ice
cream consistency to avoid motor
damage. This is not a technical
defect. If necessary, the ice cream
mass can be frozen some more
afterwards.