Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ANTTI Agrosec Optivol M11
Summary of Contents for ANTTI Agrosec Optivol M11
- Page 1 Installation and operating instructions Agrosec Optivol M11 408107 (en) ANTTI-TEOLLISUUS OY Koskentie 89 FI-25340 Kanunki, Salo Tel. +358 2 774 4700 Fax +358 2 774 4777 E-mail: antti@antti-teollisuus.fi 09-2016 www.antti-teollisuus.fi...
-
Page 2: Table Of Contents
CONTENTS Using the Optivol ..............................3 Safety ..................................3 Assembling the Optivol ............................5 Installing the Optivol inside the drying section......................6 Installing the Optivol limit sensor inside the drying section ..................8 Wiring of the Optivol ............................... 9 SERVICING ................................9 GUARANTEE ................................. -
Page 3: Using The Optivol
Connecting the electric appliances must be assigned to a skilled electrician. Refer to the separate con- necting instructions for more information. Warning! The machine must not be started unless its doors, joints and connections have been installed in such a manner that they can only be opened by using tools. Antti-Teollisuus Oy 408107 09-2016... - Page 4 Optivol Antti-Teollisuus Oy 408107 09-2016...
-
Page 5: Assembling The Optivol
Optivol Assembling the Optivol Kuljetuspakkaus A73011P Antti-Teollisuus Oy 408107 09-2016... -
Page 6: Installing The Optivol Inside The Drying Section
PARALLEL TO EACH OTHER NOTE! SLUICE DOOR OF THE AIR DUCT AND THE LE- VER PARALLEL TO EACH OTHER NOTE! PARALLEL TO EACH OTHER DIRECTION OF THE AIR FLOW NUMBER 1 SLUICE DOORS OF THE AIR DUCT CLOSED Antti-Teollisuus Oy 408107 09-2016... - Page 7 Ensure that the motor rotates in the correct direction. After having completed the wiring of the motor, check that the sluice doors certainly close; as necessary, adjust the limit switches. Close the doors by driving them against the spring force. Antti-Teollisuus Oy 408107 09-2016...
-
Page 8: Installing The Optivol Limit Sensor Inside The Drying Section
Optivol, centered with the clamps on the leverage. Put first in place the clamp on the drying section side, and after that, put the cover in place, and fasten the outer clamp. NOTE! In the StandAlone models, the limit sensor shall be installed before insulating the unit. Antti-Teollisuus Oy 408107 09-2016... -
Page 9: Wiring Of The Optivol
Optivol. All matters related to the guarantee shall be agreed upon with the manufacturer before any action is taken. Antti-Teollisuus Oy 408107 09-2016... - Page 10 Optivol Antti-Teollisuus Oy 408107 09-2016...
-
Page 11: Eu Declaration Of Conformity
Optivol EU Declaration of Conformity ANTTI-TEOLLISUUS OY Koskentie 89 FI-25340 KANUNKI Tel.: +358 (0)2 7744700 Fax +358 (0)2 7744777 declares that OPTIVOL – CLOSING DEVICE FOR AIR DUCT conform with the provisions of the following directives: Machine Directive 2006/42/EC Low Voltage Directive 2006/95/EC Electro-Magnetic Compatibility Directive (EMC) 2004/108/EC Kuusjoki 05.05.2011...
Need help?
Do you have a question about the Agrosec Optivol M11 and is the answer not in the manual?
Questions and answers