Menu Button - Optika OPTIKAM PRO HDMI Instruction Manual

MENU button

Display set
1. Press MENU button
2. Select DISPLAY SET and press MENU button to enter DISPLAY SET,
the corresponding menu will be shown as below,
3. Press UP or DOWN button to move up/down to select the parameter, press LEFT or RIGHT to adjust the value of this
parameter.
The default set and range of parameters in DISPLAY SET are:
Contrast: 8
Sharpness: 2
Saturation: 6
Brightness: 12
Gamma: 2
4. Select BACK to save the adjustment and press MENU button to exit DISPLAY SET back to main menu.
to go to menu panel like below picture.
Ranges from 0 to 15;
Ranges from 0 to 15;
Ranges from 0 to 15;
Ranges from 0 to 15;
Ranges from 0 to 3;
Page 7