3D Instruments Accu-Cal Platinum Instruction Booklet

Accu-Cal Platinum Instruction Booklet
The"Direct Drive Difference" in Digital
INTRODUCTION
Thank you for choosing the intrinsically safe Accu-Cal Platinum
Digital Ultra-Precision Test Gauge from 3D Instruments.
The Accu-Cal Platinum is very much like the 3D
Direct Drive Test Gauge; Rugged, accurate and
easy to use. The Difference is the greater
accuracy possible with a digital
display and, through an advanced design,
accuracy that is specified to be 0.04% of
reading plus .01% full scale over the
temperature range of 0 °C (32 °F) to 50
°C (122 °F) .
The large LCD was designed to be
reliable and easy to read under a variety of
environmental conditions.The Accu-Cal
Platinum display, complete with a 20 segment
bar graph for visual reference, is a five digit
display (99999), so auto-ranging is not required
to have sufficient display resolution for the rated
(Pictured with an
accuracy.
optional boot)
The silicon chip pressure sensors used are highly repeatable over pressure and tempera-
ture. Accu-Cal Platinum sensors incorporate a permanently filled oil isolated stainless
steel diaphragm in an all-welded fitting.The only wetted materials are 316 stainless steel.
Other features include the ability to select from up to 23 different pressure units
(depending on pressure range), High and Low pressure reading detection, adjustable auto
shutdown with 1500 hour battery life (continuous use) on 3 standard alkaline AA batteries,
damping, configurable sample rate and password protection of zero and cal data. The
case is polished 300 series stainless steel and is rated NEMA-4 for weather and corrosion
resistance.
And finally,the Accu-Cal Platinum is manufactured and serviced by the company that
makes THE Premier Pressure Gauge on the market today. Get The Direct Drive
Difference in Digital Today!
KT-099
06/07
Page 1 of 20