Safety Tips - Buffalo GL346 Instruction Manual

UK

Safety Tips

• Position on a flat, stable surface.
• A service agent/qualified technician should carry out
installation and any repairs if required. Do not remove any
components on this product.
• Consult Local and National Standards to comply with the
following:
- Health and Safety at Work Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• Ensure the location for the appliance can support its weight
when full.
• DO NOT immerse the appliance in water.
• DO NOT leave the machine unattended during operation.
• DO NOT operate this appliance when less than one third full.
• DO NOT touch the outer surfaces of the appliance. They
become hot during use.
• Suitable for indoor use only.
• Always switch off and disconnect the power supply to the
appliance when not in use.
• Keep all packaging away from children. Dispose of the
packaging in accordance to the regulations of local authorities.
• If the power cord is damaged, it must be replaced by an
BUFFALO agent or a recommended qualified technician in
order to avoid a hazard.
• Please ensure that the tap is screwed fully on before use.
• Buffalo recommend that this appliance is PAT tested
on an annual basis to ensure the product remains safe.
2
GL346-GL349_ML_A5_v4_20190628.indb 2 2019/6/28 17:14