Table of Contents
Advertisement
Listening to music from
your portable player
The player can be used to play the music from many
types of portable player.
1. Connect the portable player by
plugging the unit into
PORTABLE IN on the front of
the player.
2. Turn the power on:
3. Select the PORTABLE
function:
4. Turn the portable player on
and start it playing:
About MP3/WMA
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency
8 - 48 kHz (MP3), 32 - 48 kHz (WMA)
• Bit rate
8 - 320 kbps (MP3), 48 - 320 kbps (WMA)
• CD-R physical format should be "ISO 9660"
• If you record MP3/WMA files using the software which cannot create a
FILE SYSTEM, for example "Direct-CD" etc., it is impossible to playback
MP3 files. We recommend that you use "Easy-CD Creator", which creates
an ISO 9660 file system.
• File names should be named using 30 letters or less and must
incorporate ".mp3",".wma" extension e.g. "********.MP3" or "********.WMA"
• Do not use special letters such as "/ : * ? " < >"etc.
• Even if the total number of files on the disc has more than 1000, it will
only be shown up to 999.
ON PLAYER
ON REMOTE
1 1 /] ]
POWER
FUNC.
FUNCTION
Setting the Clock
1. Press for at least 2 seconds:
2. Choose from either:
AM 12:00 (for an am and pm display) or 0:00 (for a
24 hour display).
3. Confirm your selection:
4. Select the hours:
5. Press:
6. Select the minutes:
7. Press:
Use your player as an alarm clock
Press and hold TIMER for two seconds. Each function, TUNER, CD
flashes for two seconds. Press SET when the function you want to be
woken by is showing.
If you choose TUNER you will be shown the stations you have saved as
presets. Use .or > to select the station you want, then press SET.
You will be shown the ON TIME display. This is where you set the time you
want the alarm to go off. Use .or > to change the hours and minutes
and SET to save.
You will then be shown the OFF TIME display. This is where you set the
time you want the function to stop. Use .or > to change the hours
and minutes and press SET to save.
Next you will be shown the volume (VOL) you want to be woken by.
Use .or > to change the volume and SET to save. Switch the system
off. The clock icon shows that the alarm is set.
When the system is turned off you can check the time the alarm is set for
by pressing TIMER. You can also turn the alarm on and off by pressing
TIMER. To set the alarm to go off at a different time, switch the system on
and reprogramme following the same steps above.
MICRO Hi-Fi SYSTEM ] USER GUIDE
ON PLAYER
CLOCK
./>
SET
./>
SET
./>
SET
7
Hide quick links:
Advertisement
Table of Contents
