METRON PC01 Manual

USER MANUAL
PC01 AND PC02
METRON EV portable chargers PC01 and PC02 are
designed to charge electric vehicles equipped with
Type 1 charging sockets
standard) from any standard household outlet (e.g.
Schuko) or industrial socket (e.g. 1 or 3-phase CEE
sockets). Where's the in-cable "bulky box"? Metron
portable chargers are truly unique because all the
charging station electronics is placed inside Type 1
charging plug itself!
GET STARTED
First plug the portable charger in the wall outlet.
Immediately signal LED starts blinking: number of
blinks tells you what is the saved power setting (see
the next page). Afterwards LED glows constantly till
AC power is present indicating standby/ready status.
www.eauto.si
EV PORTABLE CHARGERS
(USA/Japan/S.Korea
1
info@eauto.si
advantage of this design is the fact, that METRON
portable chargers don't have that heavy in-line "bulky
box" as others do, what makes them lighter, easier to
install/connect and also easier to store in a carrier
case. METRON portable chargers also offer the
possibility to set desired charging current/power by
simply pressing a button.
When you plug it into the vehicle Type 1 socket it starts
blinking slowly, which means the vehicle is charging.
When your electric vehicle is fully charged, the LED
glows constantly again.
+386 51 320 538