Page 1
External SATA enclosure for 2.5” SATA HDDs EE2-SATA-1 external SATA enclosure for 2.5” SATA HDDs...
Page 2
No part of this manual may be reproduced, transmitted or translated in any langua ge • in any form, by any means, without the prior written permission of Gembird Electronics Ltd. Gembird Electronics makes no warranties for damages resulting from corrupted or lost •...
Page 3
External SATA enclosure for 2.5” SATA HDDs EE2-SATA-1 User Manual Introduction Thank you for buying our external SATA enclosure for 2.5” SATA HDDs! This manual will help you install it properly. Features Fully compatible with SATA device interface • Hot-swap, Plug-and-Play •...
Page 4
External SATA enclosure for 2.5” SATA HDDs Package contents SATA enclosure • SATA connecting cable • Bag of mounting screws • User Manual • Driver CD • • System requirements Personal computer equipped with SATA external port • running Windows 98/ME/2000/XP...
Page 5
External SATA enclosure for 2.5” SATA HDDs Driver installation under Windows98SE/M E/2000 and Windows XP Start the operating system mentioned above • Insert the driver CD into your CD-ROM drive. The setup • should start automatically. If by any reason it does not, double click the f ile "Setup EXE"...
Page 6
• Choose "Safely remove hardware" from the popup me nu • After your conf irmation the message "Storage device can • now be safely removed from the system" will appear. Only now you can disconnect the EE2-SATA-1 from the computer!
Need help?
Do you have a question about the EE2-SATA-1 and is the answer not in the manual?
Questions and answers