Table of Contents
Advertisement
Available languages
Available languages
•
Align the Sound bar in the chosen location. Use a pencil to mark the drilling positions 630mm (24.8")
apart:
•
The Sound bar should be located at least 7.5cm (3") below the bottom of the TV:
•
Drill holes as marked in step 1. Insert 2 screws (not supplied) into the holes and tighten . Take care to
leave 5mm between the screw heads and the wall. Hook the Sound bar into the screws. For secure
mounting ensure the screw heads slide firmly into the narrow part of the brackets.
•
In order to avoid damage to the equipment and personal injury you should get a qualified person to
drill the fixing surface and fit the appropriate wall fixings.
•
Take care not to allow the main unit to fall while attempting to hook onto the wall mount brackets.
•
Before mounting, check the wall strength, if it is not clear then consult relevant qualified personnel.
•
When drilling into walls, always check that there are no hidden wires or pipes etc.
•
Make sure the screws & wall plugs are suitable for supporting the unit.
22
Wall Mounting
Advertisement
Table of Contents
