Advertisement
TOOL AND SUPPLIES REQUIRED
#2 Phillips screwdriver
Flat-tip screwdriver
Ratchet
10 mm Socket
10 mm Combination wrench
Tape measure
Felt-tip pen
Isopropyl alcohol
Shop towel
Masking tape
Illustration of the Acura Music Link Installed on the
Vehicle
ACURA MUSIC
BUS
LINK UNIT
CABLE
AUDIO
UNIT
INSTALLATION
Client Information: The information in this
installation instruction is intended for use only by
skilled technicians who have the proper tools,
equipment, and training to correctly and safely add
equipment to your vehicle. These procedures should
not be attempted by "do-it-yourselfers."
1.
Make sure you have the anti-theft code for the
radio, then write down the frequencies for the
preset buttons.
2.
Disconnect the negative cable from the battery.
2 of 7
MUSIC LINK
HARNESS
Y-HARNESS
ADAPTER
5N15111S
BII 32726-34939 (0703)
3.
Remove the passenger's side under cover (five
clips, and release the two pins and two vehicle
connectors).
CLIPS (5)
PASSENGER'S
SIDE UNDER
COVER
4.
Open the glove box. Remove the damper rod
cover and release the damper rod. Lower the
glove box while pushing in on the left and right
sides.
DAMPER
ROD
COVER
© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
VEHICLE
CONNECTORS (2)
5N14011S
PINS (2)
6411050S
GLOVE BOX
Advertisement
