Sub-Color Adjustment; Geometry Adjustment - Samsung CB14F1T0X/XEC Service Manual

4-3-10 RF AGC Adjustment
Set the AGC data to 14 (Factory Mode).

4-3-11 Sub-Color Adjustment

Set SCR data to 10 (Factory Mode).

4-3-12 Geometry Adjustment

SC →PVA→PVS→ PSL →PHS
1. Input a lion head pattern (in the PAL channel).
2. Set the SC (S-Correction) as follows : 12 (21"),
10 (20"), 0 (14",16") and PVA 40 so that the
lion head circle becomes oval.
3. Adjust with PVS (Vertical shift) so that the top
margin of the picture is 4.
4. Adjust with PSL (Vertical-Slope) so that the
bottom margin of the picture is 4.
5. Adjust with PHS (Horizontal Shift) so that the
lion-head pattern and CRT centers are aligned.
Samsung Electronics
4
Fig. 4-7
4
Fig. 4-8
5
6. Adjust PHS (using the width coil) so that the
left and right margins of the picture are 5.
Alignment and Adjustments
5
Fig. 4-9
4-15