Advertisement
- Operation from the Tray Dispenser to the Clamp
When the loading motor drives the cam gear, the tray is
pulled out by the tray extending arm which moves along the
gear cam, and clamping is performed by sliding the clamp
lever. During disc loading the carriage chassis and spindle
motor hold positions where they do not get in the way of the
tray. However when the cam gear starts to turn(after
completion of tray dispension) the clamp lever moves and
the shaft of the carriage chassis is lifted by the stepped holes
and the carriage chassis is drawn to the stage chassis. The
spindle motor then move to the disc and lifts it from the tray.
Clamp lever
Stopper
Stepped hole
Stage chassis
Cam gear
Shaft
Tray extending arm
Clamper
Pickup unit
Spindle motor
assy
Carriage chassis
Fig. 32
CX-692
25
Advertisement
