Mpaa Rating Set Up; Change Access Code - Symphonic CSC520DE Owner's Manual

MPAA RATING SET UP

Make sure ...
•
TV/DVD power must be turned on.
1
Select "V-CHIP SET UP"
Press SETUP on the remote control.
Press Arrow (K/L) to point to "V-
CHIP SET UP".
Then, press ENTER.
2
Enter 4-digit access code
Press the number buttons. The
default code is 0000.
3
Select "MPAA RATING"
Press Arrow (K/L) to point to
"MPAA RATING".
Then, press ENTER.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG-13 Unsuitable for children under 13
R Restricted; under 17 requires accompa-
nying parent or adult guardian
NC-17 No one under 17 admitted
X Mature audience only
4
Select your desired item
Press Arrow (K/L) to point to your
desired item.
Then, press ENTER to select
[BLOCK] or [VIEW].
•
When you select the rating cate-
gory and turn it [BLOCK], the higher rating will
turn [BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
•
When you turn "G" to [VIEW], all ratings will turn
to [VIEW] automatically.
5
Exit the V-Chip setting mode
Press SETUP on the remote control to return to origi-
nal mode.

CHANGE ACCESS CODE

To change access code, follow the steps.
1
Press SETUP on the remote con-
- TV SETUP -
trol.
CHANNEL SET UP
Press Arrow (K/L) to point to "V-
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
CHIP SET UP".
Then, press ENTER.
2
ACCESS CODE
Press the number buttons. The
_ _ _ _
default code is 0000.
3
– V-CHIP SET UP –
Press Arrow (K/L) to point to
TV RATING
B MPAA RATING
CHANGE CODE
"CHANGE CODE".
Then, press ENTER.
4
Press the number buttons to enter
your desired access code in the
NEW CODE space. Then, enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
•
5
Press SETUP on the remote control to return to orig-
inal mode.
G [VIEW]
PG [VIEW]
PG–13 [VIEW]
B R [BLOCK]
NC–17 [BLOCK]
NOTE:
X [BLOCK]
•
– 18 –
Select "V-CHIP SET UP"
Enter 4-digit access code
Select "CHANGE CODE"
Enter 4-digit access code
If you enter wrong code, repeat step 4, making
sure you enter the same new code exactly in the
confirm code space.
Exit the V-Chip setting mode
If you unplug the power cord or power failure
occurs, the changed access code will be lost and
will return to default (0000). Change your access
code again as necessary.
- TV SETUP -
CHANNEL SET UP
B V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ACCESS CODE
_ _ _ _
– V-CHIP SET UP –
TV RATING
MPAA RATING
CHANGE CODE
B
NEW CODE
_ _ _ _
CONFIRM CODE
_ _ _ _
EN
0C28