Technical Specifications - Vintage Revolution Acoustic Box II Owner's Manual

Specs

Technical specifications

Connections
Input:
• Ch1: JACK passive channel; 1/4" Dia. Standard Mono Jack
• Ch2: XLR balanced phantom power +48V or 1/4" Dia. Standard Mono Jack
• Effect Jack Return Left and Return right; 1/4" Dia. Standard Mono Jack im-
pedance 18KOhm, operating at level -10dBm/+4dBm
Output:
• AMP OUT (Mix of CH1 & CH2): JACK unbalanced connection; maximum 9V
RMS @ 470 Ohms; 1/4" Dia. Standard Mono Jack
• PA (DI) OUT (Mix of CH1 & CH2): XLR LEFT and RIGHT balanced connection;
maximum 9V RMS @100 Ohms
Electrical characteristics:
Ch1 - Channel 1 (passive channel)
• Impedance 1 Meg -8.2 Meg (Selectable) Signal level up to 0 dBu;
• Adjustable Channel 1 level
• Parametric equalizer of Channel 1: Frequency range 360 Hz - 4KHz
• MID level correction: +/- 12dB.
Ch2 - Channel 2 (active channel, +48V Phantom Power)
• Impedance 2K. Signal level up to Ch2 is -20dBu;
• Parametric equalizer of Channel 2: Frequency range 360 Hz - 4KHz
Tone controls (mix of CH1 & CH2)
• Parametric Low: frequency range 40-125Hz, +/–12dB control
• Parametric Mid: frequency range 250Hz-1KHz, +/–12dB control
• Parametric High: frequency range 3.5KHz-12KHz, +/–12dB control
Power supply characterics
• 110V or 230V selectable.
• Consumption less than 12W
•Outputs: +48V,+15V-15V,+5V
Phantom power on XLR Ch2
• True +48V
Size
• 12x22x7 WxLxH cm
Weight
• 1.3 Kg without power supply.
• 1.8 Kg with power supply.
13