Table of Contents
Advertisement
Phantom Power - Metronome - Effects
Phantom 48V on/off
From the main menu press the Pref. button and use the - + buttons to activate
or deactivate the Phantom power for Ch2
Phantom 48V:OFF
Once your Phantom is set, press the Pref. button and the value will be saved.
Every time you will power up the preamp, the phantom voltage will be set ac-
cordignly.
Effects
The internal DSP is offering a different variaty of Reverbs and Delays. A copy of
the analogue preamp out is send to the effect. The send level can be ad-
justed via the Send knob. The effects are blended stereo into the analogue
signal via the Return knob. The effects can be muted and unmuted directly by
pressing the Effect button.
006 Ó*Hall*
Lvl ÒÒÒÒÒÒÒÒ
The Acoustic Box comes with 10 Reverb and 4 Delay effects preinstalled, more
will be availabe on the website of www.vintage-revolution.com.
Reverb: Spring, Room, Chapel, Church, Med Hall, Big Hall, Gated, Reverse
Programmable reverb: Plate, Hall
Programmable Delay: SingleTap, TripleDly, 4TapsDly, Twin Delay
Press the Effect button to engage the Effect mode for Internal and External ef-
fects.
The LED above the Effect button will turn on. Use the - + buttons to choose the
desired Effect. The Effects names among asterisk symbols are programmable.
Press the Edit button to enter the settings pages. the Edit button allows you to
navigate between Settings pages, while the Pref. button allows you to navi-
gate between parameters on the same Settings page. Use the - + buttons to
change the parameters. To maximize signal quality set the Send knob to the 3
o'clock and adjust the Return knob to desired blended level. The Return signal
will add to the dry signal and routed to the corresponding outputs (mono or
stereo).
Metronome and tap tempo
Pressing and holding the Tempo button will set the device on Tempo mode.
You can either set the tempo by tapping the Tempo button or by using the
- + keys. The Tempo LED will blink on the tempo you set allowing to use it as
a visual metronome. Press and hold the Tempo button to return to Effects
mode. When you are using the SingleTap delay effect, tap on Tempo button
to program the Tempo of the delay on the spot. You can also program the
Tempo using the Settings page of the SingleTap.
External Effect loop and foot switch
The Abox II is equipped with an External Effect parallel loop so that you can
add ex-ternal effects in the chain. Once the external jacks are insterted, the
internal DSP is bypassed. You can then use the Send to control the level of
signal that is routed in to the external effect. Use the Return knob to adjust the
effect level. The Abox II has a Foot Switch input which is used to activate and
bypass the internal or external effects. Any momentary switch working with
mono Jack will work fine. Return level operate at professional line level +4dBm
(return knob at 10 o'clock) or instrument line level -10dBm (return knob at the
maximum).
10
Advertisement
Table of Contents
