Table of Contents
Advertisement
Before installation
Before installation, it is important
to read the information given on the
following pages as well as the
"Warning and Safety instructions" at
the beginning of this booklet.
Installation materials
1 vent connection
for exhaust ducting 150 mm.
1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode). Depending on the
model, the non-return flap may already
be fitted.
Cover foil
for sealing the casing.
5 screws 5 x 60 mm and
5 plugs 8 x 50 mm
3 washers 6.4 mm
for securing to the wall.
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is able to take the
weight of the cooker hood.
Installation plan
See the installation plan for details on
the individual steps involved in the
installation of this appliance.
Installation
39
Hide quick links:
Advertisement
Table of Contents
