Errors and faults ..............19 The scope of delivery may vary from product images. This Maintenance and repair ............20 document was created with all due care. Trotec accepts no Disposal.................. 20 liability whatsoever for possible mistakes or omissions. Declaration of conformity ............20...
Do not use the device in potentially explosive areas. Never use the Do not use abrasive cleaners or solvents to clean the device on persons or animals. Trotec accepts no liability for device. damages resulting from improper use. In such a case, entitlements to a warranty are forfeited.
Note: Described in this operating manual is only the operation of the IR app for the AC080V. Further functions of the tablet or the Android operating system are not a part of this manual. Additionally, to create short reports relating to the images, you can use the app IR-Wizard available free of charge.
Page 5
Functions menu bar (example here: Analysis) Parameter button Charging status indicator Menu button Home button Back button Still image button Calibration / automatic adjustment button Button to change between IR camera and visual camera Operating Manual – Thermal Imaging Camera AC080V...
• 1 x charger • 1 x charging cradle • 1 x changing adapter for different socket types • 1 x USB cable • 1 x transport case • 1 x getting started guide Operating Manual – Thermal Imaging Camera AC080V...
3. Insert the battery into the compartment as indicated in the above figure. 4. Reattach the cover (5) to the battery compartment. 5. Slide the locking bar to the right. – The battery compartment is closed and locked. Operating Manual – Thermal Imaging Camera AC080V...
Page 8
Switching the device on Start the AC080V app • Press the Power button (9) for approx. 3 seconds. In order to use the IR camera first start the AC080V app via the Android user interface. – The display switches on.
Page 9
4. Calibrate the IR camera (see Calibrating the IR camera). You can also calibrate the IR camera via the AC080V app. To do so, please proceed as follows: 5. Either press the Photo button (12) or the camera icon on the display ((Image mode).
IR detector drifts and the camera could consequently display incorrect temperature values! Operating Manual – Thermal Imaging Camera AC080V...
Page 11
3. Press Confirm to confirm and save the selection. If you do not want to save the change, press Cancel. 4. Press the Back button (23) to leave the menu or briefly touch a free area on the touch screen. Operating Manual – Thermal Imaging Camera AC080V...
Page 12
Image is depicted with a higher resolution. 2. Press the Back button (23) to leave the submenu or briefly touch a free area on the touch screen. – The settings will be saved. Operating Manual – Thermal Imaging Camera AC080V...
Page 13
– In order to delete the point, drag it to the corresponding button with the recycle bin (37). • You can press the Still image button (24) to freeze an image for analysis. Operating Manual – Thermal Imaging Camera AC080V...
Page 14
– In order to delete the point, drag it to the corresponding button with the recycle bin. 4. Press Confirm to confirm and save the selection. If you do not want to save the change, press Cancel. Operating Manual – Thermal Imaging Camera AC080V...
Page 15
– In order to delete the line, drag it to the corresponding button with the recycle bin. 4. Press Confirm to confirm and save the selection. If you do not want to save the change, press Cancel. Operating Manual – Thermal Imaging Camera AC080V...
Page 16
The contrast can be entered manually. symbol) to stop recording. Auto Span The contrast is automatically adjusted. – The video will be saved. The brightness can be entered manually. Manual Level&Span Brightness and contrast are adjusted manually. Operating Manual – Thermal Imaging Camera AC080V...
Page 17
2. Select the desired settings. 3. Press Confirm to confirm and save the selection. If you do not want to save the change, press Cancel. Operating Manual – Thermal Imaging Camera AC080V...
Page 18
Example ISO Mode: Between Example ISO Mode: Below Example ISO Mode: Above Operating Manual – Thermal Imaging Camera AC080V...
Directive 2004/108/EC about electromagnetic compatibility. Herewith, we declare that the thermal camera AC080V was developed, constructed and produced in compliance with the named EC directives. marking is found on the rear of the device. Manufacturer: Trotec GmbH & Co. KG Grebbener Straße 7...
Page 24
Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info @ trotec.com www.trotec.com...