Art. Nr. 16526 POWER PACK „BULLY“ 1000 Ampere Jump Start Operating instructions Please read these instructions before starting the Poewr Pack and keep them safely for future reference. LED for the charging status Power cable 12 Volt output contact Crocodile clip (-) Crocodile clip (+) Button for the charging status Important advice before starting:...
not intended to supply electrical low-voltage systems with energy, but solely to be used as a jump start. Neither should you try to charge dry cell batteries, which are frequently used in the household, because these dry cells can explode while being charged and they can cause major damage. - If you are going to work with a lead-acid batterie, always ask another person to stick around in case you need any help.
The jump start function: 1. Begin by connecting the red crocodile clip of the “Bully“ Power Pack to the positive pole of the car battery. 2. Then connect the black crocodile clip of the „Bully“ PowerPack to the negative pole of the car chassis. 3.
Page 5
6. Do not expose your “Bully” Power Pack to rain or moisture. 7. If your “Bully“ Power Pack is not in use, it should nevertheless be kept fully charged. If you want to store it for a long period of time, you should recharge the device every four to six weeks. 8.
Need help?
Do you have a question about the APA BULLY 16526 and is the answer not in the manual?
Questions and answers