Table of Contents
Advertisement
Assembly
5. Use the rear cover mounting screw
secure the rear cover.
6. When securing the pedestal using only
anchor bolts, proceed to Step 8 "Mounting
the front cover".
2. Securing with wires or chains
1. Use the rear cover mounting screw
secure the rear cover.
2. Refer to 1. Securing with anchor bolts ,
then move the pedestal to the installation
location, lock the casters, and adjust the
tilting.
3. Remove the two eye-bolt caps at the left and
right of the rear panel.
4. Attach the eye-bolts wherever the eye-bolt
caps were removed.
5. Attach the eye-bolt caps wherever the eye-
bolts were removed.
6. Fix it like an illustration.
● Use strong wires or chains (with a breaking strength
of at least 1.2 tones, commercially available) and
fasten the plasma display to a sturdy wall, pillar, etc.
firmly enough so that it will not come loose.
24
(x1) to
(x1) to
Eye-bolt
Eye-bolt caps
Rear cover mounting
screw (M5×35)
Rear cover mounting
screw (M5×35)
Advertisement
Table of Contents
