Operating Device; Symbols - Pro KGB Series User Manual

Operating device

1. Connect power cord to the mains.
2. Turn power ON (button ON/OFF). At the same time "POWER" indicator will light. Fig 1-2.
3. Insert sheets into feed opening. Shredder automatically starts when paper is placed in the entry
and stops when shredding is finished.
4. When the maximum quantity of sheets is exceeded, or paper is clutched in the opening, the
motor will stop automatically, autoreverse function will be activated and the sheets will be fed back.
"REV" indicator will light on control panel. Remove paper from feed opening and continue
shredding.
5. In case of clutching of paper press and hold "REV" button. The motor starts in reverse direction
and the paper will be fed back. Remove paper from feed opening and continue shredding.
6. When the work is finished turn power switch to "OFF" position.

Symbols

40 - Waste bin volume (liters)
06 - Quantity of sheets shredded
CC- Shredder classification index
1 Max quantity of sheets shredded (up to 6 sheets)
2 A4-format sheet, quantity of shreds (7500 pieces)
3 Shred size (0.8x10mm (1/32" x 2/5") )
2
1
3
Fig. 2
13