Epson Pro L1060U User Manual page 268

On/Standby Status Laser
(power) light light light
Off Flashing Off
blue
Off Flashing Orange
blue
Off Flashing Off
blue
Temp light Filter Status and solution
light
Orange Off Projector is too hot (overheating) and
projection stops; let it cool down for
about five minutes
• Make sure that the vents and air
• Clean or replace the air filter
• Make sure the environmental
• If operating the projector at high
• If the problem persists, unplug the
Off Off Laser error; turn off the projector,
unplug it, and contact Epson for help
Off Orange Low air flow through the projector
• Make sure that the vents and air
• Clean or replace the air filter
• If the problem persists, unplug the
268
filter are not clogged with dust or
obstructed by nearby objects
temperature is not too hot
altitude, turn on High Altitude
Mode
projector and contact Epson for
help
filter are not clogged with dust or
obstructed by nearby objects
projector and contact Epson for
help