Advertisement
Quick Links
Adaptable Heat Drying System
WARNING!
•
Ensure that you have read and understand this manual before operating the machine.
•
Do not overload outlets or extension cords. Check power ratings before use.
•
Risk of electric shock. Do not open the unit or try to reach through the grills.
•
Ensure a suitably sized air mover is used that matches the size of the Drymatic Boost Bar inlet.
•
Minimum recommended airflow required: 650cfm (1100m³/hr).
•
Do not position air mover more than 20" (50cm) away from the Drymatic Boost Bar inlet.
An electronic version of this
instruction manual is also available
online via this QR code
www.dbkusa.com
INSTRUCTION MANUAL
Model: FGPH109
Manufactured in the UK by DBK Technitherm Ltd
All worldwide design rights and copyright reserved
9
Housing Only
Advertisement
Related Manuals for DBK Drymatic Boost Bar FGPH109
Summary of Contents for DBK Drymatic Boost Bar FGPH109
- Page 1 Adaptable Heat Drying System INSTRUCTION MANUAL Model: FGPH109 Manufactured in the UK by DBK Technitherm Ltd All worldwide design rights and copyright reserved WARNING! • Ensure that you have read and understand this manual before operating the machine. • Do not overload outlets or extension cords. Check power ratings before use.
-
Page 2: Table Of Contents
Congratulations on Your Purchase! Congratulations and thank you for your purchase of the Drymatic Boost Bar! In order to get the most out of your Boost Bar please take the time to read this user guide and familiarize yourself with the machine’s operation and features. -
Page 3: Safety And Warnings
Do not alter or modify your Drymatic Boost Bar in any way. Use only replacement parts approved by DBK. Modifications/repairs not covered in the maintenance section of this manual and the use of unapproved parts will void any remaining warranty. -
Page 4: Introduction
Raising the temperature of water damaged materials increases their vapor pressure and increases the potential for evaporation, resulting in more efficient drying. The DBK Drymatic Boost Bar has an intelligent control system that regulates its output to ensure that the temperature stays below the specified limit by varying the power of the heating device. -
Page 5: Storage And Transport
Air Guides Switch Plate with Fuse* and Power Switch *Only replace fuse with a 15A, 500V ceramic type fuse as marked on the unit. (DBK part number: EC308) Storage and Transport: • When finished with the machine, the fixed power cord can be wrapped around the unit and the plug can be clipped into cord clip as shown. -
Page 6: Set Up Guide
Set up Guide: The Drymatic Boost Bar should be set up using the following procedure: Place Boost Bar flat on the floor with an air mover directed at the inlet grill. A Fan to Boost connector can be used to maximize airflow through the unit. - Page 7 2.2 (Optional) - Connect Drymatic Boost Bar Adaptors* Drymatic Boost Bar has been designed to work with a series of adaptors that allow you to target the heated airflow into areas that may otherwise be difficult to access such as crawlspaces, ceiling voids, cavity walls, and tented areas. The Boost Bar is supported by the following adaptors: 4-Port Adaptor: 4 x 4”...
- Page 8 4. Set the desired temperature and start the machine The main screen on the Drymatic Boost Bar control panel can be used to operate the machine (Start/Stop), view the current operating conditions and graphed data. The settings button on the bottom right of the display allows the user to set the maximum temperature limit, maximum current limiter, change the language, and reset the unit ready for the next job: Airflow Indicator (Airflow Detected) Separate Icon for no airflow...
- Page 9 5. Current Limiter The Boost Bar has an optional current limiting feature that allows the technician to de-rate the heater in the event of limited power availability on site. The user can select the maximum current available on the circuit, and the on-board electronics will then monitor power usage and regulate the heater power based on current draw.
- Page 10 Fitting Adaptors: All the adaptors can be secured using the latches fitted to the Boost Bar outlet and the accessories. A) 4-Port Adaptor (4”) The Drymatic Boost Bar 4-Port Adaptor is designed to split the heated airflow into 4 separate channels; these can then be diverted into other rooms within a property or into separate drying chambers, voids, or cavities.
- Page 11 The adaptor is supplied with a kit containing 12 black plastic cuffs, and 2 x 50ft lengths of 1.5” (38mm) plastic hose. Each port is 1.5” and we recommend that users only fit the attachments supplied by DBK for the device.* Either 12 x 1.5”...
- Page 12 C) 90 Adaptor The Drymatic Boost Bar 90° Adaptor is designed to divert the heated airflow in one of two different ways: Upwards—This could be used to simply heat the ambient air in a room or a ceiling void in combination with lay flat ducting.
-
Page 13: User Maintenance
3) Remove the old fuse and replace with new one. 4) Close the fuse holder with screwdriver. Replacement fuses must be 15A, 500V fast blow ceramic types (DBK part number: EC308). In the event of damage, repairs or any other maintenance requirements please contact your local Drymatic representative. -
Page 14: Troubleshooting
Troubleshooting: In the event of a fault the first thing to try is to switch off the machine, remove the plug from the electrical outlet, and then wait ten seconds. You can then plug it back in and turn it on again, and see if there are any improvements. If not please refer to this troubleshooting table for causes and solutions. -
Page 15: Model Identification
Model Identification: The model number and serial number on your machine can be used to identify your products type and more detailed power ratings from the specification table. This serial number can be found on the sticker above the handle on your machine. Model Number Serial Number: Unique 4 digit... -
Page 16: Warranty
Please complete and mail, fax or email your warranty registration card complete with bill of sale/receipt to activate your warranty. DBK offers a standard two year comprehensive warranty from the date of purchase of Drymatic Boost Bar. Contact details can be found below. Please see the Model Identification section to locate your model and serial number.