Some engine manufactures may not recommend using compressed air when cleaning filters. If you
choose to you compressed air to clean a paper element filter, it is recommended that the filter be
cleaned with low pressure air.
This reduces the likelihood that the paper element is damaged during the cleaning process.
A recommendation is to attach an air pressure regulator to the hose that is used for filter cleaning.
Setting the regulator for 10‐20 PSI will normally do a sufficient job of cleaning without risking damage to
the element.
Air Cleaner Service –
Air filters should be cleaned per manufactures
recommendations
Oiled‐Foam type elements can be cleaned using soap and
water. Add a small amount of oil and squeeze to saturate
the element.
Paper type elements can be cleaned by tapping gently on
a flat surface or by using compressed air.
The next item to look at is Compression.