Connecting Your Monitor; Connecting The Dp And Usb 3.0 Cable - Dell P2720D User Manual

Connecting your monitor

WARNING: Before you begin any of the procedures in this section,
follow the Safety
NOTE: Do not connect all cables to the computer at the same time. It
is recommend to route the cables through the cable-management slot
before you connect them to the monitor.
To connect your monitor to the computer:
1. Turn Off your computer and disconnect the power cable.
2. Connect the DP cable from your monitor to the computer.

Connecting the DP and USB 3.0 cable

DP
1. Connect the USB upstream cable (shipped with your monitor) to an
appropriate USB 3.0 port on your computer. (See
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Connect the power cables from your computer and monitor into a wall outlet.
Instructions.
USB
Bottom view
Setting up the monitor
USB
DP
for details.)
│ 27