Advertisement
Adjust-A-Wings reflectors are scientifically designed for the advanced grower.
Developed over many years by experts in the horticultural industry.
Adjust-A-Wings reflectors are made of new 95% reflective glass coated
Step 1
Remove contents and check against the list below:
2 X Reflector wings
2 X Adjustment wires
2 X Hanging hooks and thumb screws
1 X Socket
Step 2
Remove the plastic coating from both wings.
Manufactured by Sunlight Supply
www.sunlightsupply.com
Instructions
prismatic surfaced super alloy.
, Inc. under license from Hygro International Pty Ltd
®
www.adjustawings.com
Step 3
Connect both wing sheets together by aligning
button rivets with keyhole slots and the wings will
simply lock together.
NOTE: DO NOT attach adjustment wires before
proceeding to STEP 4.
Step 4
Attach the hanging hooks to both ends of the
Adjust-A-Wings
®
using the thumb screws provided.
www.super-spreader.com
Fabricated &
assembled in
the USA with
US & globally
sourced parts
Advertisement
Table of Contents
Related Manuals for Sunlight Supply Adjust-A-Wings
Summary of Contents for Sunlight Supply Adjust-A-Wings
- Page 1 Adjust-A-Wings reflectors are scientifically designed for the advanced grower. Fabricated & Developed over many years by experts in the horticultural industry. assembled in the USA with Adjust-A-Wings reflectors are made of new 95% reflective glass coated US & globally sourced parts prismatic surfaced super alloy. Step 1...
- Page 2 Step 5 Step 7 Adjust-A-Wings settings are changed by reversing Select one adjustment wire. Take the end with STEP 6 & choosing a different position from STEP 5. the single stopper and thread it through the first keyhole, then thread it back through one of the NOTE: Adjust one end of the wires at a time.
Need help?
Do you have a question about the Adjust-A-Wings and is the answer not in the manual?
Questions and answers