Mounting The Bellow; Fastening Options - Danaher Motion THOMSON NEFF MULI Series Mounting And Maintenance Instructions

Assembly
4.5

Mounting the bellow

Fig. 11: Bellow
No.
1
2
The bellow (1) is to be pushed onto the lifting screw and fastened with the hose clamps (2).
4.6

Fastening options

The following mounting parts are to be screwed onto the fastening thread of the lifting screw
and are locked against turning with a threaded pin.
Fig. 12: Shell body mounting
No.
1
2
3
Fig. 13: Fastenings on worm gear screw jack
No.
4
5
Note mounting position!
Adjust the trunnion of the universal joint adapter (5) rotated by 90° to the ends of the
worm shaft.
38
Name
Bellow
Hose clamps
Name
Mounting plate
Fork end
Clevis
Name
Mounting brackets
Universal joint adapter
08/05
® ®
MULI - JUMBO