Sylvania SSL2606 Owner's Manual page 30

C New Password
4
Display the "New Password" screen.
• Using [ K / L ], select "New Password".
V-Chip
V-Chip
MPAA Rating
TV Rating
New Password
• Press [ENTER].
5
Change the password.
• Use Channel number buttons on the remote
control and enter the NEW 4-digit password.
• Enter password again in "Confirm password"
space.
V-Chip V-Chip
Enter password.
Confirm password.
PIN Code
6
To exit the setup, press [SETUP].
NOTES:
• Make sure to enter the exact same new password as the
"Confirm password.". If they are different, the space is
cleared for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs or when you turn off the
power using a wall switch. If you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
30
EN
BACK
Back