Page 5
THANK YOU FOR BUYING A RYOBI PRODUCT. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are To ensure your safety and satisfaction, carefully read connected and properly used. Use of these devices can through this OWNER’S MANUAL before using the product.
Page 6
g) Do not use a damaged accessory. Before each use a) Maintain a firm grip on the power tool and position inspect the accessory such as abrasive wheels for your body and arm to allow you to resist kickback chips and cracks, backing pad for cracks, tear or forces.
Always keep wheel guard between you and your 14. Lock-on button (G-2200 only) work while grinding. 15. Wheel guard lock lever (G-2350 only) 1. Attach the disc flange (6), grinding wheel and clamp nut (7) to the spindle shaft (8).
After use, check the tool to make sure that it is in top condition. surface contact between the disc and work piece. Flat surfaces It is recommended that you take this tool to a Ryobi Authorized are ground at an acute angle, (usually 10 to 20 degrees) to the Service Center for a thorough cleaning and lubrication at least work piece.
Page 12
RYOBI tool (hereinafter called “the Product”), for which it was not designed, or is not suited is warranted by Ryobi (herein called “the and no repairs, alterations or modifications Company”) to be free from defects in material...