Bosch GSR 10,8 V-EC Professional Original Instructions Manual page 9

OBJ_BUCH-1966-003.book Page 10 Wednesday, December 4, 2013 9:28 AM
10 | English
 The battery is supplied partially charged. To ensure full
battery capacity, completely charge the battery in the
battery charger before using for the first time.
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
 Read the operating instructions of the battery charger.
 Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
 Adjust the gear switch only when the machine is at a
complete stop.
 Always push the gear selector through to the stop. Oth-
erwise, the machine can become damaged.
 If the gear switch cannot be pushed through to the
stop, turn the chuck slightly (GSR 10.8 V-EC).
 The battery charge-control indicator consists of three
green LEDs, and indicates the charge condition of the bat-
tery for a few seconds when the On/Off switch is pressed
halfway or fully.
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
 To save energy, only switch the power tool on when using
it.
Symbols
The following symbols are important for reading and under-
standing the operating instructions. Please take note of the
symbols and their meaning. The correct interpretation of the
symbols will help you to use the machine in a better and safer
manner.
Symbol Meaning
GSR 10,8 V-EC/GSR 10,8 V-EC HX:
Cordless Screwdriver
Grey-marked area: Handle
(insulated gripping surface)
Article number
Read all safety warnings and all instruc-
tions
Before any work on the machine itself,
remove the battery
2 609 141 137 | (4.12.13)
Symbol
Capacity
≥ 2/3
≥1/3
< 1/3
Reserve
U
n 1
0
n 2
0
M
Ø
Ø
*
L
wA
L
pA
K
a
h
Meaning
Always wear ear protection.
Movement direction
Reaction direction
Right/left rotation
Screwdriving
Drilling
Low speed
High speed
Switching On
Switching Off
Battery Charge Indicator
Rated voltage
No-load speed (1. gear)
No-load speed (2. gear)
Maximum torque according to ISO 5393
Metal
Wood
Drilling diameter, max.
Max. screw dia.
Tool holder
Chuck clamping range
Weight according to EPTA-Procedure
01/2003
Value dependent of the battery pack
being used
Sound power level
Sound pressure level
Uncertainty
Vibration total value
Bosch Power Tools