Download Print this page

Boneco E2441A Instructions For Use Manual

Hide thumbs Also See for E2441A:

INSTRUCTIONS FOR USE

BONECO E2441A

Table of Contents

Need help?

Do you have a question about the E2441A and is the answer not in the manual?

Page 1 INSTRUCTIONS FOR USE BONECO E2441A...
Page 2 PART NAMES AND TECHNICAL SPECIFICATIONS Technical specifications Fill opening Power supply voltage 230 V / 50 Hz Power consumption 11 W Upper part Humidity output Up to 140 g/h Recommended room size Up to 25 m² Float tip Fill level ring Capacity Max.
Page 3 2. Remove the water base together with the float body. 2. The maximum capacity is 3.8 liters. Stop adding water 2. Place the BONECO E2441A evaporator on the floor or as soon as you can see the fill level ring: a flat, even surface.
Page 4 PUTTING INTO OPERATION WATER AND HYGIENE The BONECO E2441A evaporator has two operating 1. Fill the BONECO E2441A evaporator with water (see After having not been operated for a time, the modes, which can be selected using the slide switch.
Page 5 Check the water level; add water if necessary lar maintenance and cleaning is necessary to ensure high output and a long service life. After 1 week without operation Empty and clean the BONECO E2441A evaporator Every 2 weeks Clean the water base Recommended cleaning and maintenance intervals vary depending on air and water quality, and length Every 10–12 weeks (or as necessary)
Page 6 It is effective as soon odor, reduced suction etc. For replacements, check the «CLOSE» direction. as water comes into contact with it – even if the with your BONECO reseller or visit us online at BONECO E2441A evaporator is switched off. www.boneco.com. LIFECYCLE INDICATOR 1.