Package Contents; Description (Fig. A); Electrical Safety - DeWalt DW006 Instruction Manual

E N G L I S H
16 Remove the battery pack
Remove the battery pack when not in use, before
servicing and when changing accessories.
17 Have your tool repaired by an authorized
D WALT repair agent
E
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Battery charging
Battery charged
Problem charging
+
Charges NiMH and NiCd battery packs
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
Do not expose to water
Have defective cords replaced
immediately
Charge only between 4 °C and 40 °C
en - 3
See technical data for charging time
Refresh mode

Package contents

The package contains:
1 Cordless percussion drill/driver
1 Battery charger (DW006K/DW006K2)
1 Battery pack (DW006K)
2 Battery packs (DW006K2)
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your cordless percussion drill/driver has been
designed for professional drilling and screwdriving
applications.
1 Variable speed switch
2 Forward/reverse slider
3 Two gear selector
4 Mode selector
5 Side handle
6 Sleeve
7 Keyless chuck
8 Battery release button
9 Battery pack
Your D WALT charger accepts D
E
and NiMH battery packs.
9 Battery pack
10 Charger
11 Charging indicator (red)
12 Refresh mode button

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
WALT 24 V NiCd
E
18