Copying A Video Tape - Sylvania DVC841G Owner's Manual

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.
(Back of another source)
or
1) Insert a pre-recorded tape into another VCR for playing.
2) Insert a tape with its record tab into this unit for recording.
) Press [SPEED] on the remote control of the recording
unit to select the desired recording speed (SP/SLP).
4) Select the "L1" or "L2" position on the recording unit.
• To use the input jacks on the back of this unit, select
"L1" position by pressing [0], [0], [1] on the remote
control or [CHANNEL K/L] on this unit.
• To use the input jacks on the front of this unit, select
"L2" position by pressing [0], [0], [2] on the remote
control or [CHANNEL K/L] on this unit.
5) Press [REC/OTR] on the recording unit.
6) Begin playback of the tape in another source.
7) To stop recording, press [STOP/EJECT C A] on the
recording unit, then stop playback of the tape in another
source.
DVC841G_E8A04UD.indd 14
1
DVD/VCR VCR
DVD
COMPONENT AUDIO OUT AUDIO OUT
VIDEO OUT
ANT-IN DIGITAL
AUDIO S-VIDEO
Y L Connect AUDIO OUT OUT OUT
AUDIO IN
L
C R
B
VIDEO OUT
VIDEO OUT VIDEO IN ANT-OUT COAXIAL
R
C
R
Audio/Video cables
(commercially available)
(Back of DVD/VCR*)
2
DVD/VCR VCR
Connect
COMPONENT
AUDIO OUT
VIDEO OUT ANT-IN
Y L
AUDIO IN
C R
B
VIDEO OUT VIDEO IN ANT-OUT
C
R
RF cable
(supplied)
*Front input jacks are also available
Hint
• For best results during dubbing, use the front panel controls
whenever possible. The remote control might affect another
source's operation.
• Always use video-quality shielded cables with RCA-type
connectors. Standard audio cables are not recommended.
• You can use a video disc player, satellite receiver or other audio/
video component with Audio / Video outputs.
• "L1" or "L2" is found before the lowest memorized channel.
(Example: CH02)
• "L2" input jacks are on the front of this unit.
– 14 –
(Back of TV)
EN
2006/02/08 18:6:07