Preparation For Use; Turn On The Unit For The First Time; To Add Or Delete Channels; Clock Setup - Sylvania DVC840G Owner's Manual

Preparation for Use

Turn On the Unit for the First Time

Operation described in this manual are
VCR
mainly based on the remote control.
1
Turn on the TV and set it to channel .
• If channel  has been already occupied for broadcasting,
see "RF Output Channel" section on page 6.
2
Select your language in the first time you turn on this unit.
Then press [ ] to go to next step.
B
POWER
or
3
Press [ ] to start Auto Set Up.
B
Do you connect the cable from the cable box or the satellite box to the unit's
ANT-IN jack?
Yes
Press [MENU] to exit.
• Refer to "Hint for Cable Box or Satellite Box" section on page 6.
No
Please wait for a few minutes.
• The tuner stops on the lowest memorized channel.
• You can select only the channels memorized in this unit by using
[SKIP/CH. G// / K , H// L ] (or [CHANNEL K/ / / L ]).
• If "AUTO SET UP" appears on the TV screen again, check the cable
connections. Then, press [B] once again.
Hint
• Repeat these steps only if either there was a power failure or this unit has been
unplugged for more than 0 seconds.
To Select a Channel
You can select a channel by using the Number buttons or
[ ].
SKIP/CH. G/K, H/L
Notes for using the Number buttons:
• When selecting cable channels which are higher than 99,
enter channel numbers as a three-digit number. (for exam-
ple: 117, press [1], [1], [7])
• You must precede single-digit channel numbers with a zero.
(for example: 02, 0, 04 and so on)

To Add or Delete Channels

VCR
1
Press [MENU] and select "CHANNEL SET UP".
Then press [B] to go to next step.
MENU
or
• If the clock is not set, the "CLOCK SET" screen appears when you
press [MENU]. In this case, press [MENU] again.
2
Select "MANUAL SET UP".
Then press [B] to go to next step.
or
3
Select the channel to be added or deleted.
or
or
4
Select "ADD" or "DELETE".
or
5
To exit the menu
CLEAR/
C. RESET
LANGUAGE SELECT
B ENGLISH
FRANCAIS
ESPAÑOL
AUTO SET UP
YES
After scanning...
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MANUAL SET UP
CHANNEL 0
ADD
or
MANUAL SET UP
CHANNEL 0
DELETE
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Select "CHANNEL SET UP" by using [K/ / L], then press [B].
) Select "AUTO SET UP" by using [K/ / L], then press [B].
After scanning, the tuner stops on the lowest memorized
channel.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Select "LANGUAGE SELECT" by using [K/L], then
[ON]
press [B].
) Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by
using [K/L] then press [CLEAR/C.RESET].
Hint
CH 01
• If you accidentally select Spanish or French and need English: Press [MENU]
and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B] and select
ENGLISH. Finally, press [CLEAR/C.RESET].
• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button works
on the channel number memorized in this unit, [K/L] works on all.

Clock Setup

NO
VCR
1
Press [MENU] and select "CLOCK SET".
Then press [B] to go to next step.
MENU
• If the clock is not set, the CLOCK SET screen appears when you press
[MENU]. In this case, go to step 2.
2
Select the current month.
Then press [B] to go to next step.
3
Select the current day.
Then press [B] to go to next step.
4
Select the current year.
Then press [B] to go to next step.
5
Select the current hour.
Then press [B] to go to next step.
[OFF]
6
Select the current minute.
Then press [B] to go to next step.
7
Select "AM" or "PM".
(CATV)
8
To exit the CLOCK SET screen
(CATV)
Hint
• To go back one step, press [s] (during steps 2 to 7).
• Your clock setting will be lost if either there is a power failure or this unit has
been unplugged for more than 0 seconds.
– 8 –
B CLOCK SET
or
MONTH DAY
HOUR MINUTE
or
MONTH DAY
HOUR MINUTE
or
MONTH DAY
HOUR MINUTE
or
MONTH DAY
HOUR MINUTE
or
MONTH DAY
HOUR MINUTE
or
MONTH DAY
or
HOUR MINUTE
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
LANGUAGE SELECT
CLOCK SET
YEAR
1 0 / – – – – – –
AM/PM
– – : – – – –
CLOCK SET
YEAR
1 0 / 0 2 – – – –
AM/PM
– – : – – – –
CLOCK SET
YEAR
1 0 / 0 2 2 0 0 6
AM/PM
– – : – – – –
CLOCK SET
YEAR
1 0 / 0 2 MON 2 0 0 6
AM/PM
0 5 : – – – –
CLOCK SET
YEAR
1 0 / 0 2 MON 2 0 0 6
AM/PM
0 5 : 4 0 – –
CLOCK SET
YEAR
1 0 / 0 2 MON 2 0 0 6
AM/PM
0 5 : 4 0 P M AM
B PM
EN