Advertisement
Quick Links
MANUAL, INSTRUCTIONS, MMS100 - P/N: 10023523 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11", TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD TO FIT BOX
Wireless Connectivity System
NOTE: Your Mighty Mule gate operator should be installed prior to setting up the MMS100 Wireless Connectivity System.
AT THE GATE - INSTALLING THE RADIO MODULE
Prior to any assembly of the MMS100, ensure that the Mighty Mule gate operator is turned OFF and disconnected from its power source.
If required, punch out the access hole for the Auxiliary Antenna.
Align the connectors, then plug in the small radio module into the operator control board.
Guide the radio module antenna cable through the Auxiliary Antenna hold, then twist and tighten the antenna pointing upward.
Auxiliary
Antenna
Access
(Punch Out)
WiFi ROUTER - Setting Up and Provisioning The Bridge
1.
Install/locate the bridge near your wireless router.
2.
Connect the Antenna and plug in the Bridge.
3.
Plug in the MMS100 (only one gate operator can be connected to your Bridge).
4.
To pair/connect the MMS100 to your WiFi:
a) Download the Mighty Mule App from the Apple App Store or Google Play Store.
b) Create a Mighty Mule account, then sign in.
c) Select Add Device on the home screen.
d) Select Gate from the pop-up menu, then follow the instructions in the App (or refer to the quick start guide for your specific model at
www.mightymule.com).
MMS100 Installation Instructions
PRINTER'S INSTRUCTIONS
Installation Manual
Displayed Mighty Mule App images are Apple iOS. The Android app interface will be slightly different.
MMS100
PAIR
RESET
Advertisement
Summary of Contents for Mighty Mule MMS100
- Page 1 PRINTER’S INSTRUCTIONS MANUAL, INSTRUCTIONS, MMS100 - P/N: 10023523 A - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.5X11”, TOL. +/- 0.125, SCALE: 1:1, FRONT & BACK, FOLD TO FIT BOX MMS100 Wireless Connectivity System Installation Manual NOTE: Your Mighty Mule gate operator should be installed prior to setting up the MMS100 Wireless Connectivity System.
- Page 2 LED on the Bridge Module does not turn solid), then the power level will need to be adjusted. The following steps will need to be taken: NOTE: The power level will need to be adjusted on both the Control Board and the Bridge Module using the Mighty Mule App.
- Page 3 Connected to router & server. Not connected to AGO. FCC & IC Notice We, Nortek Security & Control, LLC of 5919 Sea Otter Place, Carlsbad, CA 92010, declare under our sole responsibility that the device, MMS100 complies with Part 15 of the FCC rules.