Basic Instructions For The Use Of This Product - Panasonic GA-ML4TPoE+ Series Installation Manual

Basic Instructions for the Use of This Product

 For inspection and/or repair, consult the retailer.
 Use commercial power supply from a wall socket, which is close and easily accessible to this
Switching Hub.
 Unplug the power cord when installing or moving this Switching Hub.
 Unplug the power cord when cleaning this Switching Hub.
 Use this Switching Hub within the specifications. Deviation could lead to malfunction.
 Do not touch the twisted pair cable modular metal terminals which are connected to RJ45
connectors (twisted pair ports) or the connectors, nor place them near electrically-charged
objects. Static electricity could lead to equipment failure.
 Do not put the modular plug of the connected twisted pair cable on objects that can carry
static charge, such as carpet. Do not place it in the proximity. Static electricity could lead to
equipment failure.
 Do not put a strong shock, including dropping, to this Switching Hub. Deviation could lead to
equipment failure.
 Before connecting a console cable to the console port, discharge static electricity, for example
by touching metal appliance (do not discharge by touching this Switching Hub).
 Please use this Switching Hub in place where ambient temperature is from 0 to 50°C and, do
not store and/or use this Switching Hub in the environment with the characteristics listed
below.
(Store and/or use this Switching Hub in the environment in accordance with the
specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the specifications environment.
- Strong vibration and/or strong shock.
Failure to satisfy the conditions above may result in a fire, electric shock, equipment failure,
and/or malfunction. Such events are not covered by the warranty.
*If it is used beyond the operating environmental temperatures, then the protective devices
will start working and the Switching Hub power will be shut off.
 Do not block the ventilator of the Switching Hub.
Blocked ventilator induces the heat accumulation inside, causing equipment failure and/or
malfunction.
If used at a temperature out of the operating temperature range, deviation could lead to
malfunction.
 Operation is not guaranteed if a module other than the optional SFP extension modules
(PN54022/PN54024) is inserted into the SFP extension slot.
For the latest information about compatible SFP extension modules, check our website.
 When using two Switching Hubs, do not stack them. When you place them side by side, allow
for a space of 20 mm or more between them. This space is not necessary if you use supplied
connection brackets.
 When Switching Hubs mounting to rack, leave a minimum of 20 mm space between them.
1. Please note that Panasonic shall not bear any liability whatsoever for any damages
(this shall include lost earnings, lost opportunities, etc. but this is not restricted to these
things) which were generated in relation to damages caused by operations and usage,
or the inability to use this Switching Hub, whereby the customer does not follow
this Installation Guide.
2. The contents described in this document may be changed without prior notice.
3. For any question, please contact the retailer where you purchased the product.
7