Advertisement
Table of Contents
Total Body Exerciser Cycle
Please read and retain these instructions for future reference
PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Parts List
4x End Caps
2x Foot Pedals
2x Handlebar pedals
4x Bolts for pedals/handlebar
2x Tension control knobs
4x Nuts for foot bar
4x Bolts for foot bar
Fit plastic cap onto
each end of the foot
bars.
Place the two
bearings around the
steel pedal rod with
the metal tension
piece fitting in the
groove.
Tighten down the
tension control knob
before putting on the
pedals.
Instructions for Use
8829
2x Foot bar
1x Frame
1x Upper tube
1x Lower tube
v002: 13/03/17
1x Plastic sleeve
1x Screw for plastic sleeve
2x Locking nuts
2x Bolts
Secure the foot bar to
the frame. Using nuts
and bolts supplied.
Slide the bearings and
steel rod into the
bearing case.
Push pedal onto the
steel rod. Tighten
bolts with the Allen
key.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Coopers 8829
Summary of Contents for Coopers 8829
- Page 1 Total Body Exerciser Cycle Instructions for Use 8829 Please read and retain these instructions for future reference v002: 13/03/17 PLEASE SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Parts List 4x Bolts for pedals/handlebar 2x Foot bar 1x Plastic sleeve 4x End Caps...
- Page 2 Total Body Exerciser Cycle Instructions for Use 8829 Please read and retain these instructions for future reference v002: 13/03/17 Push the second Assemble the lower pedal onto the steel upright tube to the rod and tighten bolt base unit using the with the Allen key.
Need help?
Do you have a question about the 8829 and is the answer not in the manual?
Questions and answers