Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Specflue Gainsborough Series
Summary of Contents for Specflue Gainsborough Series
- Page 1 Wood Burning Free Standing Stoves From Specflue Ltd CE and EN13240 Approved Approved for use in Smoke Control Areas when burning dry wood logs < DEVONSHIRE GILCAR > Specflue Ltd 8 Curzon Road, Chilton Industrial Estate, Sudbury, Suffolk, CO10 2XW...
- Page 2 Declaration of Performance The performance for the products identified in point 2 is in conformity with the declared performance in point 7. This declaration of performance has been issued under the sole responsibility of the manufacturer as identified in point 4 above. Signed on behalf of the manufacturer: Jeremy Fry, Chairman - 15.04.19 page 1 of 12...
-
Page 3: Chimney Cleaning
Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 2 of 12... -
Page 4: Recommended Fuels
The nominal output is the output to which the stove has been tested. In practice, the stove burns with a heat output range between its minimum and maximum ratings. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 3 of 12... - Page 5 Always ensure that the wood is not tightly stacked so that air can circulate freely. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 4 of 12...
- Page 6 Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 5 of 12...
-
Page 7: Installation Instructions
This requirement may vary depending on the shielding but is advised to keep combustible materials at least 500mm or preferably 1 metre away from the stove or flue pipe. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 6 of 12... -
Page 8: Dimensions And Clearances
Removal of the steel baffle allows immediate access into the flue system for sweeping. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 7 of 12... - Page 9 4. Removal of the baffle gives immediate access to the flue for sweeping and maintenance. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 8 of 12...
-
Page 10: Warranty
HETAS or chimney engineer and the certificate of installation and all records/receipts and annual servicing records will need to be provided in the event of any claim. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 9 of 12... -
Page 11: Terms And Conditions
In the event of any warranty claim then in the first instance a claim must be made with the stockist or stove dealer who supplied the stove and must follow our Terms and Conditions as set out below. It is entirely at Specflue Ltd decision whether to repair or replace any part that it considers are defective. - Page 12 The Devonshire is fitted, as standard, with a mechanical stop to prevent closure of the secondary air control beyond 10% open. Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 11 of 12...
- Page 13 Distance from floor to centre of rear flue outlet (mm) Efficiency (Net): Wood % 80.72 80.5 Energy efficiency label CO% @ 13% O2: Wood 0.07% 0.08% Installation and Operating Instructions for Gilcar & Devonshire Fresh Air Freestanding Woodburning Stoves Specflue v1 - April 2019 page 12 of 12...
Need help?
Do you have a question about the Gainsborough Series and is the answer not in the manual?
Questions and answers