Functions; Playback - Sylvania DVL1000G Owner's Manual

Operations described in this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Playback

Before: Turn on the TV, amplifier and any other equipments which are connected to this unit.
Make sure the TV and audio receiver (commercially available) are set to the correct channel.
(
1 Press [POWER] to turn on the DVD/CD Player.
2 Press [OPEN / CLOSE] and insert a disc
with label facing up.
3 Press [PLAY B ] to start playback.
4 Press [STOP C ] to stop playback.
TIP: You can change the On-Screen language in "PLAYER MENU" setting. (Refer to page 17.)
Hint
• When you play an MP3/WMA-format disc, details on page 12.
• A "prohibited icon" may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit.
• Some DVDs may start playback from title 2 or 3 due to specific programs.
• During the playback of a two-layered disc, pictures may stop for a moment. This happens while the 1st layer is being switched to the 2nd layer. This is not a malfunction.
DVD menu
Some discs contain menus which allow you to customize
DVD playback. Use [K / L / s / B] to select an item, then
press [ENTER] (or [PLAY B]).
Calling Up a Menu Screen during Playback
• Press [MENU] to call up the DVD menu.
• Press [TOP MENU] to call up the title menu.
Hint
• Menu operations may vary depending on the disc. Refer to the
manual accompanying the disc for more details.
Resume
Press [STOP C] during playback.
Resume message will appear on
the TV screen.
Press [PLAY B], playback will
resume from the point at which
playback was stopped.
Hint
• To cancel resume, press [STOP C] one more time in the stop mode.
• For MP3/WMA, playback will resume from the beginning of the
track at which playback was stopped.
• The resume information will be kept even when unit is in standby mode.
Paused and Step-by-Step Playback
Press [PAUSE F] during playback.
To continue playback, press [PLAY B].
The disc goes forward by one frame each time [PAUSE F]
is pressed in the pause mode.
To continue playback, press [PLAY B].
Hint
• On DVDs, set "STILL MODE" to "FIELD" in the DISPLAY menu if
pictures in the pause mode are blurred. (Refer to pages 17-18.)

Functions

)
⇒
Page 12
2
Fast Forward / Reverse Search
Use [FWD g] or [REV h] repeatedly
during playback to select the required forward
or reverse speed.
To continue playback, press [PLAY B].
Hint
• For DVDs, fast forward or reverse search speed is different
depending on the disc. Approximate speed is 1(x2), 2(x8), 3(x20),
4(x50) and 5(x100).
• For Audio CDs and MP3/WMA, approximate speed is 1(x2), 2(x8)
and 3(x30).
Slow Forward / Reverse
Press [FWD g] or [REV h] repeatedly in
the pause mode to select the required forward
or reverse speed.
To continue playback, press [PLAY B].
Hint
Resume ON
Press 'PLAY' to play from here.
• Slow forward or reverse speed is different depending on the disc.
To play the beginning,
press 'STOP' first and then 'PLAY'.
Approximate speed is 1(1/16), 2(1/8) and 3(1/2).
• Set "STILL MODE" to "FIELD" in the DISPLAY menu if pictures in
the slow playback mode are blurred. (Refer to pages 17-18.)
<Example : DVD>
Zoom
1) Press [ZOOM] repeatedly during playback to select the
required zoom factor: x2, x4 or OFF.
2) Use [K / L / s / B] to slide the zoomed picture across
the screen.
3) To exit zoom function, press [ZOOM] repeatedly to select OFF.
Hint
• Zooming function does not work while the disc menu is showing up.
• x4 zoom is not available on some discs.
• It may take several seconds to slide the zoomed picture.
– 11 –
POWER SKIP PLAY SKIP STOP OPEN/CLOSE
1 3 4 2
x2 x4
2
OPEN/CLOSE
POWER
SEARCH
1
DISPLAY MODE
AUDIO
1 2 3
SUBTITLE
6
4 5
ANGLE
7 8 9
REPEAT CLEAR HDMI
0
A-B PAUSE SKIP
2
3
SLOW
PLAY
REV FWD
4
STOP
1
E
1
EN